Filters

Intlvac can provide custom filter for a diverse range of substrates and for the VIS, NIR, SWIR, and MWIR spectral regions. The links below provide examples of a few of these coatings.

1. BandPass Filters

Coating Description

A bandpass filter is designed to transmit energy only within a selected band of wavelengths in the spectrum and reject all other wavelengths

Durability Performance

Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

2. Long Wave Pass (LWP) Filters

Coating Description

A long-wavelength pass filter transmits energy at wavelengths longer than the cut-on wavelength while energy at wavelengths shorter than the cut-on is attenuated.

Durability Performance

Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

3. Short Wave Pass (SWP) Filters

Coating Description

A short-wavelength pass filter transmits energy at wavelengths shorter than the cut-off wavelength while energy at wavelengths longer than the cut-off is attenuated. 

Durability Performance

Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

4. Neutral Density Filters

The purpose of the neutral density (ND) coating is to attenuate the incident flux. In its simplest form, the thickness of a single metallic layer is adjusted so that a prescribed transmittance is attained.

For more information about creating a custom solution for your application contact sales@intlvac.com

View Thin Film Coatings Brochure

thin film coating services